STL

<< Click to Display Table of Contents >>

Navigation:  Menu > PROJECT > Additional > Export > Basic >

STL

Previous pageReturn to chapter overviewNext page

Some parameters are available via "Set parameters" to influence the quality / resolution of the STL geometry.

Minimum element length: Minimum mesh element length.

Maximum element length: Maximum mesh element length.

Granularity: Policy of mesh element construction. 5 levels from very coarse to very fine are available.

STL write mode: Format (Binary / ASCII) for writing STL files.

Possible warnings

Problem

Possible solution

Model state contains no surfaces and no solids.

See message.

STL files describe triangulated surfaces. Points and curves cannot be represented. Select via "Set parameters" a proper model state containing surfaces or solids to be exported.