Axial Pump / Fan

<< Click to Display Table of Contents >>

Navigation:  Impeller > Main dimensions >

Axial Pump / Fan

Previous pageReturn to chapter overviewNext page

► Impeller | Main dimensions

The Main Dimensions menu item is used to define main dimensions of the axial impeller. Main Dimensions are forming the most important basis for all following design steps.

The real flow in an impeller is turbulent and  three-dimensional. Secondary flows, separation and reattachment in boundary layers, cavitation, transient recirculation areas and other features may occur. Nevertheless it is useful - and it is common practice in the pump design theory - to simplify the realistic flow applying representative streamlines for the first design approach.

Employing 1D-streamline theory the following cross sections are significant in particular: suction area (index S), just before leading edge (index 0), at the beginning (index 1) and at the end of the blade (index 2), behind the trailing edge (index 3) and at the outlet (index 4).


¢ Setup

¢ Pump: Parameters

¢ Fan: Parameters

¢ Dimensions