Ansys ICEM-CFD (Ansys)

<< Click to Display Table of Contents >>

Navigation:  Menu > PROJECT > Additional > Export > CFD >

Ansys ICEM-CFD (Ansys)

Previous pageReturn to chapter overviewNext page

The export dialog "Export ICEM-CFD" and the CFturbo2ICEM scripts are only available with the corresponding license.

This interface supports the script solution CFturbo2ICEM, a script for automatic geometry generation and meshing of CFturbo components. Therefore, it should be used only in combination with CFturbo2ICEM. Detailed information can be found on the CFturbo website.

Two files are exported: a *.tinXML file containing all meshing parameters specified in CFturbo and a *.stp file containing the designed geometry with specific naming conventions. A detailed description of the parameters can be found in the available documentation.

The Set parameters... button opens the "Export ICEM-CFD" dialog for defining the meshing parameters. These settings are saved in the *.tinXML file.

Global settings

Local settings

Possible warnings:

Outlet extension is recommended due to high mesh quality near the trailing edge.

Cell size at the interface between neighboring components should be similar.

For more information about using CFturbo2ICEM please see the available documentation.