|
<< Click to Display Table of Contents >> Progression dialog |
  
|
|
<< Click to Display Table of Contents >> Progression dialog |
|
This dialog allows to set different progression types for a given variable.
The Progression dialog can currently be used for the following variables:
•Cross section progression, in Meridional contour
•Angular positions, in Blade mean lines
•Spiral cross section progression, in Spiral development areas
Visibility of the single progression types depends on the specific context of use.
If the option Polyline is selected, a text file containing a user defined progression can be imported.
Text file format:
# cross section distribution # start/end tangential, # midsection linear # (spline interpolation 9 points) 0.00 0.00000 0.04 0.01728 0.08 0.03830 0.12 0.06368 0.16 0.09404 0.20 0.13000 0.24 0.17164 0.28 0.21687 0.32 0.26314 0.36 0.31018 0.40 0.36000 0.44 0.41404 0.48 0.47102 0.52 0.52898 0.56 0.58596 0.60 0.64000 0.64 0.68982 0.68 0.73686 0.72 0.78313 0.76 0.82836 0.80 0.87000 0.84 0.90596 0.88 0.93632 0.92 0.96170 0.96 0.98272 1.00 1.00000 |
•All lines starting with a "#" symbol are comments. All other lines contain the numerical values. •x and y coordinate values can be separated by "comma", "semicolon", "space" or "tabulator". •"Dot" character is required to be used as decimal separator. •Values are imported in the currently active units of the diagram axes. •The file can have any or no filename extension. A sample file can be generated by right clicking the progression curve and selecting “Save polyline”.
|